Doc: changed code highlighting of install commands

Stefan Cyliax · Stefan Cyliax · commit f7acd7624f97 · 2021-10-20T15:20:48.000+02:00
Signed-off-by: Stefan Cyliax &lt;stefan.cyliax@asam.net&gt;
diff --git a/doc/architecture/trace_file_naming.adoc b/doc/architecture/trace_file_naming.adoc
@@ -4,7 +4,6 @@
 
 The names of OSI trace files should have the following format:
 
-[source]
 ----
 <timestamp>_<type>_<osi-version>_<protobuf-version>_<number-of-frames>_<custom-trace-name>.osi
 ----
@@ -54,7 +53,6 @@ Given an OSI trace file with the following information:
 
 The recommended file name is:
 
-[source]
 ----
 20210818T150542Z_sv_312_300_1523_highway.osi
 ----
diff --git a/doc/setup/installing_linux_cpp.adoc b/doc/setup/installing_linux_cpp.adoc
@@ -11,28 +11,24 @@
 . Open a terminal.
 . Clone the Open Simulation repository.
 +
-[source]
 ----
 git clone https://github.com/OpenSimulationInterface/open-simulation-interface.git
 ----
 +
 . Switch to the repository directory.
 +
-[source]
 ----
 cd open-simulation-interface
 ----
 +
 . Create a new directory for the build.
 +
-[source]
 ----
 mkdir build
 ----
 +
 . Switch to the new directory.
 +
-[source]
 ----
 cd build
 ----
@@ -41,21 +37,18 @@ cd build
   To build a 32-bit target under 64-bit Linux, add `-DCMAKE_CXX_FLAGS="-m32"` to the cmake command.
   In this case, protobuf must be in 32-bit mode too.
 +
-[source]
 ----
 cmake ..
 ----
 +
 . Run make.
 +
-[source]
 ----
 make
 ----
 +
 . Install Open Simulation Interface.
 +
-[source]
 ----
 sudo make install
 ----
diff --git a/doc/setup/installing_linux_python.adoc b/doc/setup/installing_linux_python.adoc
@@ -12,28 +12,24 @@
 . Open a terminal.
 . Clone the Open Simulation repository.
 +
-[source]
 ----
 git clone https://github.com/OpenSimulationInterface/open-simulation-interface.git
 ----
 +
 . Switch to the repository directory.
 +
-[source]
 ----
 cd open-simulation-interface
 ----
 +
 . Create a new virtual environment.
 +
-[source]
 ----
 virtualenv -p python3 venv
 ----
 +
 . Activate the virtual environment.
 +
-[source]
 ----
 source venv/bin/activate
 ----
diff --git a/doc/setup/installing_windows_cpp.adoc b/doc/setup/installing_windows_cpp.adoc
@@ -10,28 +10,24 @@
 . Open a terminal as administrator.
 . Clone the Open Simulation repository.
 +
-[source]
 ----
 git clone https://github.com/OpenSimulationInterface/open-simulation-interface.git
 ----
 +
 . Switch to the repository directory.
 +
-[source]
 ----
 cd open-simulation-interface
 ----
 +
 . Create a new directory for the build.
 +
-[source]
 ----
 mkdir build
 ----
 +
 . Switch to the new directory.
 +
-[source]
 ----
 cd build
 ----
@@ -40,14 +36,12 @@ cd build
   To build a 64-bit target, add `Win64` to the generator name.
   In this case, protobuf and protoc.exe must be in 64-bit mode too.
 +
-[source]
 ----
 cmake .. [-G <generator>] [-DCMAKE_INSTALL_PREFIX=<osi-install-directory>]
 ----
 +
 . Build and install OSI.
 +
-[source]
 ----
 cmake --build . [--config Release]
 cmake --build . --target install
diff --git a/doc/setup/installing_windows_python.adoc b/doc/setup/installing_windows_python.adoc
@@ -10,21 +10,18 @@
 . Open a terminal.
 . Clone the Open Simulation repository.
 +
-[source]
 ----
 git clone https://github.com/OpenSimulationInterface/open-simulation-interface.git
 ----
 +
 . Switch to the repository directory.
 +
-[source]
 ----
 cd open-simulation-interface
 ----
 +
 . Run the setup script.
 +
-[source]
 ----
 python setup.py install
 ----

Original file line number	Diff line number	Diff line change
`@@ -11,28 +11,24 @@`
`11`	`11`	`. Open a terminal.`
`12`	`12`	`. Clone the Open Simulation repository.`
`13`	`13`	`+`
`14`		`-[source]`
`15`	`14`	`----`
`16`	`15`	`git clone https://github.com/OpenSimulationInterface/open-simulation-interface.git`
`17`	`16`	`----`
`18`	`17`	`+`
`19`	`18`	`. Switch to the repository directory.`
`20`	`19`	`+`
`21`		`-[source]`
`22`	`20`	`----`
`23`	`21`	`cd open-simulation-interface`
`24`	`22`	`----`
`25`	`23`	`+`
`26`	`24`	`. Create a new directory for the build.`
`27`	`25`	`+`
`28`		`-[source]`
`29`	`26`	`----`
`30`	`27`	`mkdir build`
`31`	`28`	`----`
`32`	`29`	`+`
`33`	`30`	`. Switch to the new directory.`
`34`	`31`	`+`
`35`		`-[source]`
`36`	`32`	`----`
`37`	`33`	`cd build`
`38`	`34`	`----`
`@@ -41,21 +37,18 @@ cd build`
`41`	`37`	To build a 32-bit target under 64-bit Linux, add `-DCMAKE_CXX_FLAGS="-m32"` to the cmake command.
`42`	`38`	`In this case, protobuf must be in 32-bit mode too.`
`43`	`39`	`+`
`44`		`-[source]`
`45`	`40`	`----`
`46`	`41`	`cmake ..`
`47`	`42`	`----`
`48`	`43`	`+`
`49`	`44`	`. Run make.`
`50`	`45`	`+`
`51`		`-[source]`
`52`	`46`	`----`
`53`	`47`	`make`
`54`	`48`	`----`
`55`	`49`	`+`
`56`	`50`	`. Install Open Simulation Interface.`
`57`	`51`	`+`
`58`		`-[source]`
`59`	`52`	`----`
`60`	`53`	`sudo make install`
`61`	`54`	`----`
Original file line number	Diff line number	Diff line change
`@@ -12,28 +12,24 @@`
`12`	`12`	`. Open a terminal.`
`13`	`13`	`. Clone the Open Simulation repository.`
`14`	`14`	`+`
`15`		`-[source]`
`16`	`15`	`----`
`17`	`16`	`git clone https://github.com/OpenSimulationInterface/open-simulation-interface.git`
`18`	`17`	`----`
`19`	`18`	`+`
`20`	`19`	`. Switch to the repository directory.`
`21`	`20`	`+`
`22`		`-[source]`
`23`	`21`	`----`
`24`	`22`	`cd open-simulation-interface`
`25`	`23`	`----`
`26`	`24`	`+`
`27`	`25`	`. Create a new virtual environment.`
`28`	`26`	`+`
`29`		`-[source]`
`30`	`27`	`----`
`31`	`28`	`virtualenv -p python3 venv`
`32`	`29`	`----`
`33`	`30`	`+`
`34`	`31`	`. Activate the virtual environment.`
`35`	`32`	`+`
`36`		`-[source]`
`37`	`33`	`----`
`38`	`34`	`source venv/bin/activate`
`39`	`35`	`----`
Original file line number	Diff line number	Diff line change
`@@ -10,28 +10,24 @@`
`10`	`10`	`. Open a terminal as administrator.`
`11`	`11`	`. Clone the Open Simulation repository.`
`12`	`12`	`+`
`13`		`-[source]`
`14`	`13`	`----`
`15`	`14`	`git clone https://github.com/OpenSimulationInterface/open-simulation-interface.git`
`16`	`15`	`----`
`17`	`16`	`+`
`18`	`17`	`. Switch to the repository directory.`
`19`	`18`	`+`
`20`		`-[source]`
`21`	`19`	`----`
`22`	`20`	`cd open-simulation-interface`
`23`	`21`	`----`
`24`	`22`	`+`
`25`	`23`	`. Create a new directory for the build.`
`26`	`24`	`+`
`27`		`-[source]`
`28`	`25`	`----`
`29`	`26`	`mkdir build`
`30`	`27`	`----`
`31`	`28`	`+`
`32`	`29`	`. Switch to the new directory.`
`33`	`30`	`+`
`34`		`-[source]`
`35`	`31`	`----`
`36`	`32`	`cd build`
`37`	`33`	`----`
`@@ -40,14 +36,12 @@ cd build`
`40`	`36`	To build a 64-bit target, add `Win64` to the generator name.
`41`	`37`	`In this case, protobuf and protoc.exe must be in 64-bit mode too.`
`42`	`38`	`+`
`43`		`-[source]`
`44`	`39`	`----`
`45`	`40`	`cmake .. [-G <generator>] [-DCMAKE_INSTALL_PREFIX=<osi-install-directory>]`
`46`	`41`	`----`
`47`	`42`	`+`
`48`	`43`	`. Build and install OSI.`
`49`	`44`	`+`
`50`		`-[source]`
`51`	`45`	`----`
`52`	`46`	`cmake --build . [--config Release]`
`53`	`47`	`cmake --build . --target install`
Original file line number	Diff line number	Diff line change
`@@ -10,21 +10,18 @@`
`10`	`10`	`. Open a terminal.`
`11`	`11`	`. Clone the Open Simulation repository.`
`12`	`12`	`+`
`13`		`-[source]`
`14`	`13`	`----`
`15`	`14`	`git clone https://github.com/OpenSimulationInterface/open-simulation-interface.git`
`16`	`15`	`----`
`17`	`16`	`+`
`18`	`17`	`. Switch to the repository directory.`
`19`	`18`	`+`
`20`		`-[source]`
`21`	`19`	`----`
`22`	`20`	`cd open-simulation-interface`
`23`	`21`	`----`
`24`	`22`	`+`
`25`	`23`	`. Run the setup script.`
`26`	`24`	`+`
`27`		`-[source]`
`28`	`25`	`----`
`29`	`26`	`python setup.py install`
`30`	`27`	`----`